DecoratingBoston.com

Torsion springs are one of the most important part of the garage door whether it be a manual or automated garage door. This is because the torsion springs lift most of the weight of a garage door and helps it to go up. As with any other mechanical equipment, springs of the garage door will also tire out after some period, and eventually they will need replacing. But keep in mind that replacing torsion springs of a garage door is not a do it yourself project. In fact, trying to do so may even be dangerous. So it’s always better to leave this job with the specialists.

If you have decided to attempt to change the torsion springs by yourself, don’t forget to have a safe pair of hands nearby. Apart from helping you in fixing the springs he can also be of help if some undesired event happens. Because of the nature of risk involved in torsion springs, it is must to have someone to help you out as there are strong chances of any mishap while operating it.

Keep in mind that springs come in different sizes and it is very important to replace the springs of your garage door with another of the same size. It is good to check the diameter and length of the spring to ensure correct spring for your door. As most of the weight of the garage door is held by the torsion spring, selecting a wrong spring can be fatal.

Make sure to do some comparison shopping for torsion springs before you select the right one. These can be purchased online also if you know the correct measurements Also, it is highly recommended to do a general maintenance of your garage door when attempting to change their springs. This occasion can be used to look for any sign of deterioration on ropes, pulleys and the hardware. Also check all moving parts and for signs of corrosion.

Make sure that you have all the tools available to you and will not be looking for them once you start the process. It is really helpful to have someone to pass tools to you. After replacing the spring the door should work well. For checking up the torque experienced by the spring, lift the door half way down. The door should stay still if the torque applied is correct. In case the door rise up or close down by itself it may require loosen up or tighten it down.

Derek Grovat has been providing helpful information regarding Garage Door Fairfax for many years. His expertise is the result of years of hands on experience in the garage door business. If you are having trouble with your door and would like some help he recommends giving Garage Door Repair Fairfax a call.